View Basket



TMV2 Logo

The Government recommends the use of thermostatic mixing valves (TMV's) for baths, taps and showers for all housing. TMV2 Certified valves maintain the pre-set temperatures even if the water pressure varies when other appliances are used, preventing domestic scalding.

TMV valves will react to sudden adjustments to water supply within 1.5 seconds


TMV3 Logo

TMV3 valves are engineered to a high standard so that they meet Government Health and Safety requirements for use in public places such as Schools, Hospitals, Offices etc., and would significantly reduce the risk of scalds occurring in the home or anywhere that hot water is delivered through mixing valves.

TMV valves will react to sudden adjustments to water supply within 1.5 seconds


Appropriate products have been extensively tested by the WRc and are approved or pending approval to comply with the Water Regulations Advisory Scheme. You can learn more about the approval process here.



Water can often be wasted at the basin, by leaving the tap running whilst cleaning your teeth for example, so to help combat this, we have introduced the Eco-Click mono basin mixers. These water efficient fittings feature a specially designed Eco-Click cartridge, allowing you to select reduced or full flow from the tap. Click to the first setting for 50% flow rate and simply click again to achieve full flow.

Eco-Click mono basin mixers cost exactly the same as standard mixers, so you can go green with paying for it.

Eco-Click Logo


The Phoenix Enviro-Click cartridge was designed to run at either full or reduced flow rates. Simply by selecting the first click uses 50% flow and then click again for full flow. By selecting the 50% flow rate while brushing your teeth or washing your face you can actively reduce your carbon footprint.

Enviro-Click Logo

SBH P Ratings

SBH P-Rating Pledge

The P RATING. Uncovered radiators are rated according to room volumes in cubic metres: (length x width x height).

The P RATING assumes room are equipped to modern standards of insulation and that your boiler delivers water to the radiator at min. of 75° C. (entry temperature of ΔT50)

The SBH PLEDGE: For one year from date of purchase, we (the manufacturer) pledge to accept the return and make full refund of the purchase price, of any radiator selected according to the SBH P Rating, if you are not completely happy with its performance.


  1. Measure your room's length, width and height in metres.
  2. Multiply length x width x height = P Rating.
  3. Choose an SBH Radiator with a P Rating the same of greater than your calculated P Rating.

Dual Fuel

Dual fuel installations utilise two heat sources. The set-up allows for standard pipe-work to be fitted from the central heating while simultaneously allowing an electric element to be fitted to the towel rail/radiator. During cooler months when the central heating is on the install often won't require the use of the element, conversely during warmer months when the central heating is off the element can be used to warm that single towel rail/radiator.

Electric Only

Electric only installations are designed to run solely on an electric element inserted into your towel rail/radiator. You will not require radiator valves with this type of install. All electric only installations should be wired in by a qualified professional.

IP Ratings

Protection against solid objects Protection against liquids
First number Definition Second number Definition
0 No protection 0 No protection
1 Protected against solid objects over 50mm (e.g. accidental touch by hands) 1 Protected against vertically falling drops of water
2 Protected against solid objects over 12mm (e.g. fingers) 2 Protected against direct sprays up to 15° from the vertical
3 Protected against solid objects over 2.5mm (e.g. tools and wires) 3 Protected against direct sprays up to 60° from the vertical
4 Protected against solid objects over 1mm (e.g. tools, wires and small wires) 4 Protected against direct sprays from all directions - limited ingress permitted
5 Protected against dust - limited ingress (no harful deposit) 5 Protected against low pressure jets of water from all directions - limited ingress permitted
6 Totally protected from dust 6 Protected against strong jets of water e.g. for use on shipdecks - limited ingress permitted
X Denotes irrelevance to this product 7 Protected against the effects of temporary immersion between 15cm to 1m. Duration of test 30 minutes
See an image of this chart with illustrated examples 8 Protected against long periods of immersion under pressure.
Wildcard SSL