Showerguard is a fantastic innovated and revolutionary new product for the shower glass, porcelain, ceramic tiles and mirrors in your bathroom or wet-room. Once applied you'll see why this has become the most durable labour saving product available in glass protection.
Showerguard for Used Glass is supplied with a 150ml bottle of Signo Lime-scale remover, 30ml bottle of Showerguard x 1, 30ml bottle of Pre-clean x1, 1 pre-clean application cloth (white), 1 Showerguard application cloth (blue) and 1 set of latex safety gloves.
With a quick and simple lime-scale and contaminant removal, Showerguard will provide you with a permanent protection against lime-scale and the contaminants of soapy water, giving you an easier cleaning experience of your shower screen.
Once you have evenly distributed the Signo lime-scale remover over the glass surface, starting at the top and working your way to the bottom. Allow a twenty minute period for full activation to take place. Then return to your surface and rinse heavily with water using a cloth (which is not provided) to wipe away all residue and dry thoroughly. If all lime-scale is not removed on the first attempt, simply re-apply until all glass is clean and clear.
Now your glass is 100% dry, clean and clear of lime-scale clean thoroughly with the pre-cleaning solution and pre cleaning cloth (provided) to remove any remaining dirt, grease and finger prints from your dedicated surface. We recommend you use the gloves provided to avoid leaving further finger-print marks on the surface during this preparation process. Your glass is clean when streak formation is no longer evident. It is vital you take note of when this happens, as Showerguard can only adhere to totally clean and dry glass.
Once pre-cleaning has successfully been completed and your surface has dried, spray Showerguard onto the inside glass surface ensuring good coverage evenly distributed. Then simply spread the surface with the blue coating cloth to ensure the entire glass surface has been covered.
Immediately after this application, a chemical reaction within Showerguard's nano-particles form a strong bond with the glass surface. Allowing a no use period of 24hrs at 20°C or room temperature. Will not only give the rapid bonding process time to take place between your glass and the coating, but will provide you with fantastic results for the future.
Once used, your Showerguard coating goes into action, immediately inhibiting the adhesion of lime-scale and other contaminants. Frequency of cleaning will affected by the conditions, water content and use. To provide you with outstanding results every time, Wipe down with rubber blade after each use to remove repelled lime-scale. Combine this with the use of an appropriate glass cleaner and a soft cleaning implement, you will see just how effectively residue build up is removed. Enjoy the time that you've saved! |
